The HYDRAULIC series of oils are anti-wear (AW) hydraulic oils. They are blended from quality paraffinic mineral oil for its stability and high natural Viscosity Index (VI), which gives these oils their ability to maintain their viscosity over a relatively wide range of temperatures.
DATA SHEET:
| Manufacture | Hall-Chem |
| Color | Red |
| Grade | 32 |
| Temperature Rating | -12°C to 64°C |
The performance of hydraulic oil is defined in three ways: • The oil’s ability to protect hydraulic pumps and motors from wear damage, particularly at the high operating pressures often used in modern hydraulic systems.
• The oil’s ability to resist deterioration, particularly oxidation, which is caused by the effect of air on the oil, and thermal degradation, which is caused by the effect of heat.
• The oil’s ability to resist the harmful effects of water contamination, which can hydrolyze additives, accelerate oxidation, promote sludge formation and cause filters to plug.
Sold in 18.9 L pale
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.
